Sale!

Rikon 10 inch Bandsaw with Stand and Miter Gauge 10-310

Original price was: $349.99.Current price is: $69.98.

SKU: 10052540006682 Category:

Description

The Rikon 10-310 is our recommendation for anyone looking for a capable bandsaw to augment work with a larger saw, or someone venturing into small scale woodworking like bandsaw boxes, shapes, limited resawing, & patterns. What’s particularly attractive about this saw is the price point.

The worst enemy of a bandsaw & blades is tension. It can fatigue blades early, fatigue bearings in your bandsaw, and flatten the urethane or rubber on your wheels so that a restart produces a thump, thump sound. Being able to apply & release tension with a lever, especially in a reasonably priced 10″ bandsaw, is pretty useful. A significant improvement on the 10-310 is its tension release mechanism, previously only available on the more expensive 10-3061 10″ saw. The tension release mechanism makes setting up, using, and leaving the saw until next weekend so much easier.

The 10-310 cabinet is made of a thinner sheet metal than its predecessor, the 10-305. Compensating for that change, the 10-310 now comes with an open stand. (It is not bench mount). You can install a shelf below to store gear & material as needed. On a flat garage surface, the 10-310 stand provides stability that the 10-305 could not out of the box.

Features
  • Rugged welded steel column and frame
  • Spring loaded tool-less upper & lower blade guides
  • Machined cast iron table with 3/4″ x 3/8″ miter gauge T slot
  • Quick-release blade tension system
  • Large blade tension hand wheel
  • Balanced drive wheels
  • 2-1/2″ OD dust port
  • Includes stand
  • Includes miter gauge
Specifications
  • Motor: 1/3 hp TEFC; 115 V; 3.5 A
  • Cutting Capacity: 9-5/8″ wide x 4-5/8″ high
  • Cast Iron Table: 11-3/4″ wide by 11-3/4″ deep
    (With 3/8″ x 3/4″ T miter slot)
  • Table tilt: up to 45° right or 5° left
  • Fence: 2″ x 12-1/8″
  • Dust port: One 2-1/2″ OD – 2-1/4″ ID
  • Cast Aluminum Wheels: 10″ diameter
  • Blade Length: 70-1/2″
  • Blade Width: 1/8″ – 1/2″
  • Comes with 5/16″ 6 tpi blade installed
  • Cutting Speed: 2625 fpm
  • Overall size: 25-3/4″ wide x 17-1/2″ deep x 59″ high
  • Weight: 61.75 lb
  • Footprint: 25-3/4″ wide x 17-1/2″ deep
  • FIVE-YEAR manufacturer’s warranty

Reviews

There are no reviews yet.

Be the first to review “Rikon 10 inch Bandsaw with Stand and Miter Gauge 10-310”

Your email address will not be published. Required fields are marked *