Festool Circular Saw Clamp and Connector Kit TS 55 FEQ-F-Plus-FS Imp 576708491498K

Description

Details

The NEW Festool Plunge Cut Track Saw TS 55 F is now twice as fast as its predecessor because of the new generation blade and concentrated torque.

This kit is equipped with everything you need to get started on your next sawing project:

• TS 55 F (576708)
• Two FS 1400/2, 55 inch guide rail (491498)
• Two Festool Quick clamp 1pc, MFT, FS (491594)
• Festool Guide Rail Connector, 2 pack (577039)

576708, FESTOOL TS 55 FEQ-F-PLUS US PLUNGE-CUT SAW
Millions of saws do not lie: The TS has always stood out with its absolute precision cuts, maximum power and extreme durability. The usual reliability remains – but the working speed is unprecedented: The TS 55 now saws at up to twice the speed. In addition, the new generation of cutting blades guarantees perfect cutting quality with maximum cutting performance. With accessories, such as guide rails and the angle stop, or sophisticated and proven details, such as the splinter guard and extraction system perfectly matched to the machine, the TS 55 provides excellent work results and a top-class sawing system – for every challenge.

Features:

Concentrated torque and up to twice as fast work progress with an increased saw blade service life
Top-class sawing system thanks to a variety of optional accessories
The cutting edge from 90° to 47° remains unchanged even when the saw bevels
Riving knife for safer work and simple positioning in existing joint
Angle adjustment with undercut function from -1° to 47°
Virtually splinter-free on both sides thanks to attachable splinter guard
Smooth housing allows cuts close to the wall (12mm,~1/2″)
Transparent sliding viewing window providing view of the saw blade
Specifications:

Power consumption 1 200 watt
Idle engine speed 2 000 – 5 800 RPM
Saw blade diameter 6-1/4″ (160 mm)
Angular range -1 – 47 °
Cutting depth 0″ – 2-1/8” (0 – 55 mm)
Cutting depth at 45° 1-11/16” (43 mm)
Dust extraction connection dia. 1-1/16″/1-7/16″ (27/36 mm)
Weight 9.92 lbs (4.5 kg)

______________________________________________________________________________________________________________

491498, Festool FS 1400/2, 55 inch guide rail

Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 – 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Use the FS 1400 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

Festool absolutely straight, safe and precise. Festool FS guide rails are available in ten different lengths from 32 to 197 inches, providing the right rail for every application. Simply lay the guide rail on the workpiece and line up the splinterguard flush with the scribe line. Now place your Festool circular saw on the guide rail. The guide rib on the rail engages in the guide slot on the tool. You save laborious measurements and obtain perfectly straight and accurate cuts.
Festool guide rails are equipped with a splinter guard. A rubber lip pressing onto the workpiece along the scribe line ensures splinter-free cut edges. Precise angle cuts up to 45 on both sides. With the FSW angle unit and a guide rail you can quickly set angles of 0 to 45 to either side. This allows you to cut boards and panels to any size at any desired angle, fast, safely, and accurately. A guide rail fixed into place with the special Festool FSZ clamps, and a guide stop adjusted to be free of backlash, provide the basis for ultra-precise work. For example, use it for dovetail joints produced in several steps. Even when routing against the grain, the router cannot deviate from the desired path, giving perfect results.

Guide rail features:

Hard-anodized surface
Soft, non-slip coating
Hard rubber splinter guard

Mounting slot for:

FSW angle unit
FSV connectors
FSZ clamps
FS-AW Deflector

Length 55 inches (1400 mm)

____________________________________________________________________________________________________________

491594 Festool Quick clamp 1pc, MFT, FS

The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning. Clamping thickness 6 5/8 inches (168mm). Includes 1 clamp.

Clamping thickness 6 5/8 inches (168mm)
Secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application.
Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow
Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.

____________________________________________________________________________________________________________

577039, FESTOOL CONNECTOR FSV/2
The two Connectors allow users to connect two guide rails so that they are straight and stable. The self-aligning
function makes it quick and convenient to connect the guide rails. The connectors are compatible with all Festool
guide rails. They ensure precise cuts over the entire length of two or more connected guide rails.

Features:

For long cuts
The connectors allow users to
make straight and precise cuts
over the length of two or more
connected guide rails.
High level of stability
The guide rails joined with the
connectors offer a high level of
stability for a connection that
holds in any position.​
Simply connect
The self-aligning function
makes it quick and convenient
to connect two guide rails.
Clear marking
The laser engraving ensures
that the two connectors are
used in the correct order. Use
the aligning connector first,
followed by the stabilizing one.​

Specifications