Rikon Turning System Carbide Insert Cutters

Description

Rikon Turning System Carbide Insert Cutters

Specifications

• Square — 13mm x 13mm x 3.2mm (~ 1/2″ x 1/2″ x 1/8″)
• Round — 14mm Diameter x 3.2mm (~ 9/16″ x 1/8″)
• Diamond — 31mm x 13.8mm x 3.2mm (~ 1-1/4″ x 9/16″ x 1/8″)
• Detail Diamond — 31mm x 12mm x 3.2mm (~ 1-1/4″ x 1/2″ x 1/8″)
• Radius Detailing — 31mm x 13.8mm x 3.2mm (~ 1-1/4″ x 9/16″ x 1/8″)
• R2 Radius Square — 14mm x 14mm x 3.2mm (~ 9/16″ x 9/16″ x 1/8″)
• Semi-Circle — 14mm Diameter x 5mm (~ 25/32″ x 3/16″)
• Fingernail — 27mm x 13mm x 5mm (~ 1-1/16″ x 1/2″ x 3/16″)
• Paisley Left — 27mm x 14mm x 5mm (~ 1-1/16″ x 9/16″ x 3/16″)
• Paisley Right — 27mm x 14mm x 5mm (~ 1-1/16″ x 9/16″ x 3/16″)
• Assortment of 5 Includes: 2 Round, 2 Square & 1 Diamond Shapes

Rikon tungsten carbide insert cutters will stay sharp far longer than conventional carbon or high speed steel turning tools. Once a cutter finally becomes dull after many hours of use, it can be quickly rotated to provide a fresh sharp edge. Once all edges have become dull, they can be touched up with a diamond hone for additional use, or replaced with a new insert cutter.

Negative rake inserts are for turning very hard materials like plastics, acrylics, resins and dense woods.

Comes with replacement screw.