Phoenix USA DOT Sim Set NF98 w/ Air Max AML1 (NF98M)

Description

The Phoenix USA DOT Sim Set NF98 w/ Air Max AML1 (NF98M) offers a comprehensive solution for enhancing the appearance and improving the practicality of your 1992-2007 Ford E350 or E450 van equipped with 16-inch, 8-lug dual rear wheels. This kit combines the aesthetic appeal of polished stainless steel wheel simulators with the functional benefit of an Air Max valve extension kit, making tire maintenance simpler and more convenient. Designed for a precise fit on wheels with an 8-hand hole configuration and a 6.5-inch bolt circle, this set provides a seamless upgrade to your vehicle.

KEY FEATURES AND BENEFITS:

• Vehicle Compatibility: Specifically engineered for Ford E350 and E450 models manufactured between 1992 and 2007 that feature 16-inch, 8-lug dual rear wheels.
• Enhanced Aesthetics: Constructed from polished stainless steel, the wheel simulators provide a clean, bright, and professional look to your vehicle’s wheels.
• Improved Tire Access: The included Air Max AML1 braided stainless steel valve extension kit simplifies the process of checking and inflating the inner and outer rear tires.
• Durable Construction: The stainless steel material ensures the simulators are resistant to corrosion and can withstand the rigors of daily use.
• Easy Installation: The over-lug mounting system allows for a straightforward installation process using the existing lug nuts.
• Complete Kit: This set includes all necessary components for installation, including front and rear simulators, the Air Max valve extension kit, and mounting hardware.
• DOT Compliance: The “DOT” designation indicates that these simulators meet the standards set by the Department of Transportation.
• Contoured Design: The rear simulators are designed with a deep dish to match the wheel’s shape, while the front simulators offer an outward dish for a balanced appearance.
• Accessible Hubs: Front simulators feature pop-out center caps, providing easy access to the wheel hubs when needed.

SPECIFICATIONS:

• Product Name: Phoenix USA DOT Simulator Kit w/ Air Max AML1
• Product Model: NF98M
• Vehicle Fitment: 1992-2007 Ford E350 and E450
• Wheel Size Compatibility: 16-inch
• Lug Count: 8-lug
• Bolt Circle (BC): 6.5 inches
• Hand Hole Count: 8
• Rear Wheel Type: Dual Rear Wheel
• Material: Polished Stainless Steel
• Mounting Type: Over-Lug (Stud Mount)
• Included Valve Extension Kit: Air Max AML1 (Braided Stainless Steel)
• Kit Contents: 2 Front Simulators, 2 Rear Simulators, 4 Braided Stainless Steel Valve Extensions, 4 Mounting Brackets, Mounting Hardware, Installation Tool, Instruction Sheet

HOW TO USE:

1. Preparation: Ensure your vehicle is parked on a level surface with the parking brake engaged. Gather all components of the Phoenix USA DOT Simulator Kit and the necessary tools (typically the provided installation tool and a lug wrench if needed for initial lug nut checks).
2. Front Simulator Installation:
   • Position the front wheel simulator against the wheel, aligning the holes in the simulator with the lug studs.
   • Secure the simulator by tightening the existing lug nuts over the simulator’s mounting points. Ensure they are snug but do not overtighten initially.
   • Once all lug nuts are engaged, use the appropriate torque specifications for your vehicle to fully tighten the lug nuts.
   • If access to the hub is required, the center cap on the front simulator can be carefully popped out using the provided tool or by hand in some cases.
3. Rear Simulator Installation:
   • Position the rear wheel simulator (the deeper dished ones) against the outer rear wheel, aligning the holes with the lug studs.
   • Secure the simulator by tightening the existing lug nuts over the simulator’s mounting points. Again, tighten snugly first, then use the vehicle’s specified torque to fully secure them.
4. Air Max Valve Extension Kit Installation:
   • Inner Wheel Extension: Locate the valve stem on the inner rear wheel. Screw one of the Air Max valve extensions onto this stem. Position the extension so that the end is accessible through one of the hand holes in the outer wheel and secure it using one of the provided brackets and jam nuts.
   • Outer Wheel Extension: Locate the valve stem on the outer rear wheel. Screw one of the Air Max valve extensions onto this stem. Position the extension so that it is easily accessible and secure it using a bracket and jam nut. The 120-degree bend on some extensions is designed to aid in accessibility.
   • Repeat this process for the other side of the vehicle’s rear dual wheels.
5. Final Check: After installing all simulators and valve extensions, double-check that all lug nuts are tightened to the correct torque specifications and that the valve extensions are securely mounted and easily accessible.

BENEFITS OF USING THE PHOENIX USA DOT SIM SET NF98 W/ AIR MAX AML1 (NF98M):

• Enhanced Vehicle Appearance: Instantly upgrades the look of your Ford E-Series van with the bright, clean finish of polished stainless steel wheel covers.
• Simplified Tire Maintenance: The Air Max AML1 valve extension kit removes the difficulty of accessing the inner rear tire valve stems, making pressure checks and inflation a much simpler task.
• Long-Lasting Quality: Constructed from stainless steel, these simulators are built to resist rust and corrosion, ensuring a lasting visual upgrade.
• Direct Fit: Specifically designed for the targeted Ford E350 and E450 models, ensuring a proper and secure fit without modification.
• Meets DOT Standards: The DOT compliance provides assurance that the product meets relevant safety and quality regulations.
• Protection for Wheels: The simulators can offer a degree of protection to the underlying wheels from road debris and elements.
• Professional Image: The polished look contributes to a more professional and well-maintained appearance for your vehicle.

FEATURES:

• Polished stainless steel composition for a brilliant and lasting shine.
• Over-the-lug mounting system for simple and secure attachment.
• Deep-dished rear simulator design that contours to the wheel profile.
• Outward-dishing front simulator design for a balanced visual.
• Pop-out center caps on front simulators for convenient hub access.
• Braided stainless steel valve extensions for enhanced durability and flexibility.
• Specifically engineered brackets for secure and accessible valve extension placement.
• Designed to fit 8-lug wheels with a 6.5-inch bolt circle and 8 hand holes.
• Includes all necessary mounting components and an installation tool for user convenience.