Description
Radius Bits are used to create prefect radii on edge banding. Match the radius to the thickness of the edge banding used. Each bit uses two four-sided replaceable carbide cutters. When the bit gets dull, just rotate the cutter 90° and keep on cutting. After using all four sides, replace the cutters at a fraction of the price of a new bit.
The best tool for radiusing edge banding is theFestool MFK 700 EQ/B Edge Banding Router, but any router that takes 8mm shank bits will work.
| Radius (R) |
Large Diameter (D) |
Cutting Length (NL) |
OAL | Shank | Festool # |
|---|---|---|---|---|---|
| 1.0mm | 28mm (~1-3/32″) |
3mm (~1/8″) |
55mm (~2-3/16″) |
8mm | 499811 |
| 1.5mm | 28mm (~1-3/32″) |
3mm (~1/8″) |
55mm (~2-3/16″) |
8mm | 499810 |
| 2.0mm | 28mm (~1-3/32″) |
3mm (~1/8″) |
55mm (~2-3/16″) |
8mm | 499809 |
| 3.0mm | 28mm (~1-3/32″) |
3mm (~1/8″) |
55mm (~2-3/16″) |
8mm | 499808 |
Reviews
There are no reviews yet.