3M Scotch-Brite Hand Pad Holder

Description

3M Scotch-Brite Hand Pad Holder

Use a hand pad holder with3M Scotch-Brite hand padsto get the smoothest finish on flat surfaces. Cut the hand pad a little larger than the holder and press it on the bottom. The holder will keep the hand pad flat without marring your finish.

The952 Heavy Duty Hand Pad Holderis 3-3/8″ wide by 5-3/4″ long.It can handle pads up to 4″ by 6″. The bottom of the heavy duty holder has short, stiff “bristles” mounted in a resin plate. The bristles slide into the mesh of Scotch-Brite pads and hold on tight.

The961 Light Duty Hand Pad Holderis 3-1/4″ wide by 4-5/8″ long.It can handle pads up to 3-1/2″ by 5″. It uses 3M’s Twist-Lok attachment system. The bottom of the holder has many small T-shaped hooks that grip the Scotch-Brite pad similar to hook and loop. Press it onto the pad and give it a little twist to grip the pad.