Snappy Drill-Countersink – Set of 3

Description

Snappy Drill-Countersink – Set of 3

Drill the pilot hole and countersink or counterbore for screws in one easy step. Countersink to drive the head of the screw flush with or slightly below the surface. Easily control depth using an optional stop collar. Counterbore to drive the screw below the surface and plug the hole. The 82° countersink angle matches the angle on the head of most wood screws.

To control the depth, we recommend a stop collar (not included). Snappy’sstandard 3/8″ stop collarwill do the job, but you get the best results with thePremium Rotating Depth Stop.

Includes

• 7/64 x 3/8 Countersink and drill for #6 hardwood and #8 softwood screws
• 1/8 x 3/8 Countersink and drill for #8 hardwood and #10 softwood screws
• 9/64 x 3/8 Countersink and drill for #10 hardwood and #12 softwood screws
• 1/8 inch hex wrench