Phoenix USA 22.5″ x 9″ Width Rear Pair DOT Axle Set (N259R)

Description

The Phoenix USA 22.5″ x 9″ Width Rear Pair DOT Axle Set (N259R) offers a practical and aesthetic upgrade for your commercial vehicle. This kit includes two high-quality rear wheel simulators crafted from polished stainless steel, designed to enhance the appearance of standard steel wheels. Engineered for a precise fit, these simulators are compatible with 22.5-inch diameter wheels that are 9 inches wide, featuring a 10-lug pattern on an 11.25-inch bolt circle and incorporating a 2-hand hole design for convenient access. The bolt-on, stud-mount system is specifically intended for stud pilot applications utilizing 1 1/8″ lug studs, ensuring a secure and straightforward installation process. Beyond their visual appeal, these simulators are DOT compliant, signifying adherence to safety and quality standards. The inclusion of pop-out center caps further enhances functionality by allowing easy access to the wheel hubs for maintenance without the need for complete simulator removal. This comprehensive set includes all necessary mounting hardware, an installation tool, and detailed instructions, providing a complete solution for upgrading your vehicle’s rear wheels.

KEY FEATURES AND BENEFITS:

• Enhanced Appearance: Instantly elevates the look of standard steel wheels with a bright, polished stainless steel finish, providing a more premium and professional aesthetic.
• Precise Fitment: Specifically engineered for 22.5″ x 9″ wheels with a 10 on 11.25″ bolt circle, 2 hand holes, and stud pilot mounting with 1 1/8″ studs, ensuring a secure and accurate fit.
• Durable Construction: Manufactured from high-quality polished stainless steel, offering excellent resistance to corrosion, rust, and the rigors of daily use, contributing to a longer lifespan.
• Easy Hub Access: Features convenient pop-out center caps, allowing quick and easy access to the wheel hubs for inspection, maintenance, and servicing without the hassle of removing the entire simulator.
• Simple Installation: Utilizes a bolt-on, stud-mount design that attaches directly over the existing lug nuts onto the wheel studs, making the installation process relatively straightforward with the included hardware and tool.
• DOT Compliant: Meets Department of Transportation standards for secure attachment, providing assurance of safety and reliability on the road.
• Complete Kit: Includes two rear wheel simulators, all necessary mounting hardware, an installation tool, and a comprehensive instruction sheet, providing everything needed for a successful installation.

SPECIFICATIONS:

• Wheel Compatibility: 22.5″ Diameter x 9″ Width
• Lug Count: 10 Lugs
• Bolt Circle: 11.25″ (also compatible with 285mm)
• Hand Holes: 2
• Lug Stud Type: Stud Pilot, 1 1/8″
• Mounting Style: DOT Over-Lug, Bolt-On, Stud Mount
• Material: Polished Stainless Steel
• Set Includes: 2 Rear Wheel Simulators, Mounting Hardware, Installation Tool, Instruction Sheet
• Center Cap: Pop-Out for Hub Access
• Application: Rear Axle

HOW TO USE:

• Preparation: Ensure your vehicle is safely parked on a level surface with the parking brake engaged. Gather all components of the Phoenix USA Wheel Simulator Kit, including the two simulators, mounting hardware, and the installation tool.
• Wheel Inspection: Verify that your vehicle’s rear wheels match the required specifications: 22.5″ diameter, 9″ width, 10 lugs on an 11.25″ bolt circle, 2 hand holes, and 1 1/8″ stud pilot lug studs.
• Simulator Placement: Carefully position one of the rear wheel simulators against the corresponding wheel, aligning the simulator’s lug holes with the wheel’s lug studs. Ensure the simulator sits flush against the wheel surface.
• Hardware Installation: Using the provided mounting hardware, typically consisting of specialized nuts or brackets, secure the simulator to the wheel studs. The exact method will be detailed in the included instruction sheet. Use the installation tool to tighten the hardware evenly, following any specified torque recommendations in the instructions to ensure a secure fit without over-tightening.
• Repeat for Other Wheel: Follow steps 3 and 4 to install the second rear wheel simulator on the other rear wheel of your vehicle.
• Final Check: Once both simulators are installed, double-check that all mounting hardware is securely fastened. Ensure the simulators are firmly attached and do not wobble or move. If the kit includes pop-out center caps, ensure they are properly in place.
• Review Instructions: Refer to the complete instruction sheet provided with the kit for any specific details or warnings related to your particular model.

BENEFITS OF USING THE PHOENIX USA 22.5″ x 9″ WIDTH REAR PAIR DOT AXLE SET (N259R):

• Professional Image: Enhances the overall appearance of your truck, projecting a more polished and professional image on the road.
• Protection Against Elements: The stainless steel construction provides a barrier against road debris, salt, and other environmental factors that can damage the underlying steel wheels.
• Maintained Wheel Condition: By covering the original wheels, the simulators can help to preserve their condition and appearance over time.
• Ease of Maintenance Access: The pop-out center caps simplify routine maintenance checks and servicing of the wheel hubs without requiring the removal of the entire simulator, saving time and effort.
• Secure and Compliant: Being DOT compliant ensures that the simulators are designed and manufactured to meet safety standards for secure attachment to your vehicle.
• Cost-Effective Upgrade: Offers a more affordable alternative to purchasing expensive aftermarket alloy or chrome wheels while still providing a significant visual upgrade.

FEATURES:

• Constructed from high-grade polished stainless steel: For a brilliant and lasting shine.
• Deep-dished rear design: Contours seamlessly with the wheel profile.
• Engineered with precise lug hole alignment: For straightforward mounting.
• Includes specialized mounting components: Designed for stud pilot systems.
• Pop-out center mechanism: Allows quick access to hub components.
• Bolt-on installation: Utilizes existing wheel studs, requiring no specialized modifications.
• Designed specifically for dual-wheel rear axle configurations.
• Offers a robust layer of protection: Against environmental wear and tear.
• Comes as a complete pair: Ensuring a consistent look across the rear axle.