Description

These are premium blades, precision milled, set and hardened for outstanding performance and durability in any scrollsaw. All are 5 inches long, with plain ends. #5 and smaller blades can literally turn on a point, cutting crisp right-angle corners and curves as tight as you can see.

Skip Tooth blades are the standard choice for extremely smooth cutting in any wood. They can cut mild brass, aluminum, silver and copper.
The no. 5 skip tooth size w/ 12.5 tpi is the top choice for removing waste when cutting dovetails.

Double Tooth blades cut almost as cleanly but allow faster rates, expecially in thick stock.

Reverse-Tooth blades, with a few up-cutting teeth on the bottom, can solve tearout problems in very brittle wood.

Thick Wood blades have aggressive, heavily set hook teeth for fast work in 1″-2″ stock. (Note these blades have teeth full length – no plain end.)

Additional information

mycustom	Size#Size 2/0 – Veneer – 28tpi>Size 2 – 1/16 inch – 1/4 inch – 20tpi>Size 4 – 1/4 inch – 1/2 inch – 15tpi>Size 5 – 1/4 inch – 3/4 inch – 12.5tpi>Size 7 – 1/2 inch – 1 inch – 11.5tpi>Size 9 – 5/8 inch – 1-1/8 inch – 11.5tpi>Size 12 – 3/4 inch – 1-1/2 inch – 9.5tpi