Speedhut 2-1/16″ 30inhg-0-20 psi Boost/Vac Gauge (L2-BV3-DATZ)

Description

Speedhut 2-1/16″ 30inhg-0-20 psi Boost/Vac Gauge (L2-BV3-DATZ) is an essential instrument for accurately monitoring your vehicle’s forced induction system. This gauge provides real-time readings of engine boost and vacuum levels, allowing for precise optimization of both turbocharged and naturally aspirated engines. Its straightforward installation and robust design make it a valuable tool for both performance enthusiasts and those looking to ensure the efficiency of their vehicle. The inclusion of a high-quality pressure sender ensures reliable and accurate measurements.

KEY FEATURES AND BENEFITS:

• Real-time monitoring of engine boost and vacuum levels.
• Precision optimization for turbocharged and naturally aspirated engines.
• Easy installation with a robust design.
• High-quality pressure sender for reliable and accurate readings.

SPECIFICATIONS:

• Gauge Type: Boost/Vacuum Gauge
• Pressure Sender Type: 3-Wire Military Grade Transducer (Performance)
• Range: 30 inHg – 0 – 20 psi
• Size: 2 1/16 inch (52mm)
• Hole Size: 2.062 inches (52mm)
• Standard or Metric: Standard
• Warning Light: No
• Ships With:
  • Pressure Gauge Wiring Harness (3-Wire Cable)
  • Pressure Sensor – 30 psi
  • Boost/Vac Hose Kit
  • 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks

HOW TO USE:

• Mount the Gauge: Locate a suitable 2 1/16″ (52mm) diameter opening in your vehicle’s dashboard or instrument panel. Secure the gauge using the provided spin-lock ring.
• Install the Pressure Sensor: Identify a suitable location on your engine’s intake manifold or a relevant vacuum/pressure source. Install the included 30 psi pressure sensor at this location.
• Connect the Hose: Attach one end of the provided boost/vac hose to the pressure sensor. Run the hose to the back of the gauge and connect it to the designated port.
• Wire the Power and Lighting: Connect the 3 ft power and lighting harness to a suitable 12V power source in your vehicle. Ensure proper grounding. This harness will also power the LED illumination of the gauge.
• Connect the Sensor Wiring: Attach the 3-wire cable from the pressure sensor to the corresponding terminals on the back of the gauge, following the wiring diagram provided with the product.
• Verify Functionality: Once all connections are secure, start your vehicle and observe the gauge readings to ensure proper operation. The gauge should display the current vacuum or boost level of your engine.

BENEFITS OF USING THE SPEEDHUT 2-1/16″ 30INHG-0-20 PSI BOOST/VAC GAUGE (L2-BV3-DATZ):

• Precise monitoring of critical engine parameters for optimal performance and efficiency.
• Real-time feedback on boost and vacuum levels aids in early detection of engine issues.
• Enhances engine reliability and longevity by allowing for fine-tuning adjustments.
• Clear visibility with illuminated display for use under various lighting conditions.
• Straightforward installation with included hardware for easy setup.

FEATURES:

• Instantaneous readings of intake manifold pressure and vacuum.
• High-accuracy 3-Wire Military Grade Transducer for precise measurements.
• Compact 2 1/16″ size for versatile mounting options within the vehicle’s interior.
• Easy installation with spin-lock mounting system.
• Illuminated display for clear visibility in various lighting conditions.
• Complete with all necessary hardware for a straightforward setup.
• Engineered specifically for forced induction systems.
• Valuable tool for diagnosing engine-related pressure issues.
• Contributes to maximizing the engine’s power and efficiency.