Foredom #50 Chisel Handpiece

Description

Foredom #50 Chisel Handpiece

Foredom’s chisel handpiece adds incredible versatility to your flex shaft machine.It is 6-1/4″ long x 1″ diameter, with a tapered nose.It accepts both Foredom chisels andFlexcut’s small RG-series chisels.

While it can be used on 1/8HP Foredom machines (older model S & SR models),we strongly recommend that you use it on 1/6HP SR (new models) or 1/3HP TXmachines.It should only be used in the forward motor direction.It can beused up to 18,000 RPM, but works best in the 3,000-10,000 rpm range.

PLEASE NOTE
The 50 & 50C handpieces DO NOT fit Foredom Heavy Duty H-Series machines with square drive shafts.These handpieces are only compatible with Foredom’s spline-type drive machines.

The 50 handpiece is available by itself for you with your chisels OR with a set of Foredom chisels.

Model H.50 Handpiece includes:

• Handpiece
• Wrench
• Grease
• NO chisels

Model H.50C Handpice with Chisels includes:

• Handpiece
• Wrench
• Grease
• Six Chisels
• #3 x 8mm (~5/16) gouge
• #7 x 8mm (~5/16) gouge
• #11 x 3.5mm (~1/8) V parting tool
• 70° x 5.5mm (~3/16) V parting tool
• #1 x 9mm (~3/8) single bevel chisel
• #2 x 9mm (~3/8) single bevel skew chisel