Jet J-8201K 115/230V 1PH 14″ Metal/Wood Vertical Bandsaw (414500)

Description

The Jet J-8201K 115/230V 1PH 14″ Metal/Wood Vertical Bandsaw (414500) is a versatile and powerful saw ideal for fabrication shops and workshops. This heavy-duty bandsaw features a 1 HP motor that delivers smooth cutting performance on a variety of materials, including wood, metal, non-ferrous metals, and plastic.

KEY FEATURES AND BENEFITS:

• CSAG-certified motor and electrics ensure operator safety.
• Solid one-piece steel base provides exceptional stability during operation.
• Gearbox design allows for cutting a wide range of materials.
• Eight variable blade speeds (39-278 SFPM for metal, 3300 SFPM for wood) offer optimal control for different materials.
• Adjustable table tilts 45° to the right and 15° to the left for angled cuts.
• Includes a 14 TPI metal cutting blade and a 6 TPI wood cutting blade for immediate use.
• Durable cast iron frame construction ensures long-lasting performance.
• Conveniently located on/off switch for easy operation.
• Miter gauge for accurate cuts (sold separately on some platforms).
• Dust chute helps collect sawdust for a cleaner work environment (sold separately on some platforms).
• 2-year warranty ensures peace of mind.

SPECIFICATIONS:

• Motor: 1 HP, 115/230V, 1Ph
• Blade size: 3/8 x .025 x 92-1/2″
• Blade width: 1/8 – 3/4″
• Height capacity (max): 6″
• Throat capacity: 13-1/2″
• Table size (L x W): 14 x 14″
• Table tilt: 45° to the right, 15° to the left
• Table height: 44″
• Overall dimensions (L x W x H): 25-1/2 x 22-3/8 x 73-1/2″
• Weight: 280 lbs

HOW TO USE:

1. Secure the material to the table using clamps. Ensure the material is properly secured to prevent slipping during cutting.
2. Select the appropriate blade for the material you are cutting. Refer to the blade speed chart in the manual for recommended speeds for different materials.
3. Adjust the table to the desired cutting angle, if necessary. Loosen the table tilt knobs, tilt the table to the desired angle, and retighten the knobs.
4. Turn on the bandsaw and allow the blade to reach full speed.
5. Guide the material slowly into the blade while maintaining firm pressure. Feed the material at a controlled rate to avoid bogging down the motor.
6. Once the cut is complete, turn off the bandsaw and allow the blade to come to a complete stop before raising the blade arm.

BENEFITS OF USING Jet J-8201K 115/230V 1PH 14″ Metal/Wood Vertical Bandsaw (414500):

• Cuts through a wide variety of materials: The J-8201K is versatile enough to handle various cutting tasks, from wood and metal to plastic and non-ferrous metals.
• Powerful and efficient motor: The 1 HP motor provides ample power for smooth and efficient cutting.
• Durable construction: The cast iron frame and solid steel base ensure long-lasting performance.
• Precise cutting: The adjustable table and variable blade speeds allow for accurate and controlled cuts.
• Safe operation: The CSA-certified motor and electrics promote operator safety.

FEATURES:

• CSA-certified motor and electrics
• Solid one-piece steel base
• Gearbox design for wider material compatibility
• Eight variable blade speeds
• Adjustable table with tilting capability
• Includes two blades (metal and wood)
• Durable cast iron frame
• Conveniently located on/off switch