Description
Record Power SC3 and SC4 Lathe Chuck Jaws
Record Power offers a fourteen sets of jaws to grip just about anything you could fit on theirSC3 &SC4 . The Record Power jaws offer the ability to rough turn a bowl, re-chuck a bowl to finish turn the outside, turn a box, drill a pen blank and many other operations.
| Type | Internal Grip | External Grip Round |
External Grip Square |
RP # |
|---|---|---|---|---|
| 35mm- 1-3/8″ |
1-1/2″ – 2-5/16″ (38-58mm) |
1-1/8″ – 1-7/8″ (28-47mm) |
5/8″ – 1-7/16″ (16-37mm) |
62321 |
| 50mm – 2″♦ |
2-1/16″ – 2-13/16″ (52-72mm) |
1-5/8″ – 2-3/8″ (42-61mm) |
1-3/16″ – 2″ (30-51mm) |
62313 |
| 75mm Heavy Bowl – 3″ |
3-3/16″ – 4″ (81-102mm) |
1-13/16″ – 2-9/16″ (46-65mm) |
1-5/16″ – 2-1/8″ (33-54mm) |
62322 |
| 100mm Dovetail – 4″ Deep Gripper |
3-11/16″ – 4-1/2″ (94-114mm) |
3″ – 3-3/4″ (76-95mm) |
2-1/8″ – 2-15/16″ (54-74mm) |
62329 |
| 130mm Dovetail – 5-1/8″ |
4-15/16″ – 5-3/4″ (125-145mm) |
4-1/8″ – 4-13/16″ (104-123mm) |
2-15/16″ – 3-11/16″ (74-94mm) |
62317 |
| Long Nose |
2-1/8″ – 2-15/16″ (54-74mm) |
1-1/2″ – 2-5/16″ (38-58mm) |
1-1/16″ – 1-7/8″ (27.5-48mm) |
62323 |
| Pin |
1″ – 1-3/4″ (25-45mm) |
3/8″ – 1-1/8″ (9-28mm) |
1/4″ – 1-1/16″ (7-27mm) |
62327 |
| Mini Spigot |
1″ – 1-13/16″ (26-46mm) |
1/2″ – 1-5/16″ (13-33mm) |
7/16″ – 1-1/4″ (11-31mm) |
62336 |
| Pen |
1″ – 1-13/16″ (35-64mm) |
7/16″ – 13/16″ (11-20mm) |
3/8″ – 1″ (10-26mm) |
62337 |
| Mini Remounting |
3-3/4″ – 8-7/16″ (95-215mm) |
2-5/16″ – 6-11/16″ (59-170mm) |
2-1/6″ – 6-1/16″ (53-154mm) |
62356 |
| Mega Remounting |
2-1/6″ – 12-7/16″ (53-316mm) |
2-3/16″ – 10-11/16″ (55-272mm) |
2″ – 9-13/16″ (51-250mm) |
62377 |
| Soft Plastic | Custom Fit Outside Diameter 5-1/2″ (140mm) |
62378 | ||
|
Metric measurements are binding. Inch measurements are approximate. ♦ 50mm Jaws are standard equipment on the SC3 & SC4 chucks. |
Additional Information
Record Power SC3 & SC4 Jaw Manual
Reviews
There are no reviews yet.