Description
Every woodworker needs screwdrivers in the shop.Why not have a really nice, good-looking set?
These screwdrivers from Narex have a hardened, chrome-plated steel shaft that runs the all the way through the handle of the screwdriver and will withstand light impacts. (Don’t use a 2 pound hammer, but if you need to seat the screwdriver in a worn Phillips head screw, this is really handy.) At the base of the handle, the shaft has a hex-shaped fitting.If you have an especially difficult to remove screw, you can put a wrench on the hex to generate extra torque.
The stained birch handles are triangular so you can get a good grip and they won’t roll off your bench.
We offer the screwdrivers in Phillips (#2 & #3); Robertson-Square Drive(#3); and Slotted (4.5mm -11/64″, 5.5mm – 7/32″ & 7mm – 9/32″).
| Type | Size | OAL | Handle Size | HW# |
|---|---|---|---|---|
| Phillips | No. 3 | 10-5/8″ (270mm) |
4-23/32″ x 1-7/32″ (120mm x 31mm) |
148106 |
| Slotted | 1/8″ (3.5mm) |
6-11/16″ (170mm) |
3-3/4″ x 15/16″ (95mm x 24mm) |
148107 |
| 11/64″ (4.5mm) |
7-3/8″ (185mm) |
3-3/4″ x 15/16″ (95mm x 24mm) |
148108 | |
| 7/32″ (5.5mm) |
7-11/16″ (195mm) |
3-3/4″ x 15/16″ (95mm x 24mm) |
148109 | |
| 9/32″ (7mm) |
9-1/4″ (235mm) |
4-11/32″ x 1-7/32″ (110mm x 31mm) |
148110 | |
| (210mm) | 4-11/32″ x 1-7/32″ (110mm x 31mm) |
148103 | ||
| Metric measurements are precise.Inch measurements are approximate.OAL = Overall Length |
Reviews
There are no reviews yet.